Are you looking at your uncovered window and thinking about how to fit curtain poles to install your beautiful curtains? Curtains are the window treatments that give a finished and complete look to the interior of your space. If the rod of these curtains is not hung correctly, it will add an uneven look to your window hangings. So, it is necessary to fit these poles carefully. It may look challenging to install the poles, but you can do it by following the right guide and using the required materials to ensure the proper fitting. This guide by Curtains Accessories provides easy steps to put up the poles.
Before directly installing the poles for window hangings, it is essential to do the proper planning and preparation.
- Determine whether you want to hang the poles in the window casing or outside of the casing. It is better to fit the rods on the wall if your window casing is made of plastic to ensure its longevity.
- Choosing a drill for pilot holes depends upon the type of wall. The masonry drill bit and wall anchors are recommended for the drywall. For the other wall, use a standard drill along with a drill bit.
- Prepare the area by removing any excessive materials like rugs, chairs, and side tables to ensure no distractions.
Don’t ignore the safety measures because it is as necessary as any other decoration task in your space. Before starting the installation process, it is recommended to test the cables or pipes in the wall for 100% safety assurance. You can also use a cable detector for this purpose, additionally, use gloves and an ear defender to protect your ears from some high-power tools. After ensuring the safety measures, you can start the curtain pole installation process.
You’ll need some material while installing the pole.
- Curtain Pole
- Screws
- Brackets
- Drill
- Drill Bits
- Measuring Tape
- Step Ladder
- Pencil
- Wall Anchor
- Spirit Level
4 Steps to Fit Curtain Poles
Below are some easy and simple steps to put up the poles for window hangings.
Measure The Size
The first step of fitting is to take window frame measurements, always start measuring from 4 inches above the window frame. To specify the length of your curtains, take a measuring tape and measure from top to bottom. Taking proper window measurements is essential to approximate the length of the rod. Extend the pole for about 6 inches for curtains to block incoming light.
Mark The Measurements
After taking the proper measurements, take a pencil and mark the measurements on the wall before directing the hardware, like screws and brackets. You can remove the pencil marking from the wall after the rod installation. Use a spirit level to ensure that the markings are at the straight level, it is necessary to make sure the alignment of your curtain hardware.
Drill Pilot Holes
Now start drilling the pilot holes in the wall before screwing. It will prevent the screws from rupturing the casing or wall. After drilling the pilot holes, add wall plugs and install the brackets. If you are installing in a drywall, don’t forget to use screw anchors to provide additional support. To locate the stud in the wall, use a stud finder.
Hang the Curtains
The last step is to hang the curtains on the pole to ensure its functionality. To hang the curtains, thread them on the pole and position the pole on the brackets. Here, you are done with an easy way to put up the curtain poles.
Picking The Right Curtain Pole
Selecting suitable curtain poles is necessary because they should fulfill your window requirements, area functionality, and budget. Below are some critical factors to consider when choosing the rod/hardware for your window covering.
Material Specification
The poles used for window hangings are made from different materials like wood and metal. And the material choice depends upon your preference.
Metal Pole: The poles made from metal have enhanced functionality and give your space a contemporary and modern finish. The curtains are more likely to operate smoothly on metal poles like wrought iron or brass.
Wooden Poles: On the other hand, wooden poles are versatile; they can fit into almost any interior. This type of pole can provide symmetry to the lined and heavy curtains because of their wider diameter.
Functionality
Both wooden and metal curtain poles have their importance. The wooden rods can bear the weight of heavy curtains and give a classic and comfy look to any space. At the same time, the metal poles are a low-budget option and resistant to erosion and humidity therefore stay longer than expected.
Style And Decor
If you want an inviting and luxurious ambiance, go with the wooden poles. Select the one that complements the interior of your space. You can also paint the wooden rods according to your decor theme. Whereas, if you want a contemporary or industrial look, then go with the metal poles. You can choose brass, wrought iron, nickel, and steel.
Give A Finishing
You can give a finishing look to your poles by adding finials, holdbacks, and rings. These accessories could be used for decorative or functional purposes. You can use any material for the finals like decorative holdbacks to keep the curtains in one place when open.
Final Words
To install the curtains, there will be a need to put up the curtain poles. Hanging these poles may look complicated, but it could be done by using some necessary materials. You can easily fit the rod by taking exact measurements and using appropriate tools. Besides its installation, you should consider a rod that complements the interior of your space and has better functionality.